Galvanized mesh
Galvanized diamond mesh for fencing factories, land and open sites. Corrosion-resistant and suited to long runs.
Security fence contractor in Saudi Arabia
Security fence contractor for factories, warehouses and projects
If you are looking for a security fence contractor who starts from the site rather than an off-the-shelf template, this page explains how Qimam Al-Hemaya builds fences: measuring the route and setting the height, then foundations, posts and bracing, mesh, gates and top protection, and finally checking alignment before handover.
Inspection firstMeasure the route, corners, entrances and ground before fixing quantities.
Specified to the siteHeight, mesh and posts are set by the protection level required.
Solid foundations and postsPosts fixed on foundations with bracing that keeps them true during works.
Top protection and gatesBarbed wire and manual or sliding gates where needed, in a clear scope.
What is a security fence contractor?
Fencing built to the site,
not to a template.
A security fence contractor turns a protection need into work that can be executed on site: measuring the route, locating corners and gates, choosing mesh and posts, preparing foundations, then installing and checking. The difference between a fence that lasts and one that needs early repair usually comes down to these details before installation, not after.
At Qimam Al-Hemaya Contracting we build security fences for factories, warehouses, construction projects, land and farms across the Kingdom. We start with an inspection, then present an itemized scope covering mesh, posts, foundations, gates and top protection, so you know what is and is not in the price before we begin.
For the wider picture of our services see our security fence page (Arabic), or our pages on galvanized fencing, agricultural fencing and steel hangars if your project spans more than one service.
From the field
Four stages that show
how a fence is built.
From mesh and posts on foundations, to lifting a post onto its base with a guide string, to top protection with barbed wire — these photos show different stages a security fence project goes through.
Security fence solutions
Six elements we define
before installation.
No single fence suits every site. We decide these elements with you after the inspection so the quote is clear and reviewable.
Welded mesh panels
Welded panels with an orderly look and higher rigidity for sites needing a higher protection level.
Barbed wire
Coiled or straight top protection, added where the project calls for a stronger deterrent, subject to site rules.
Foundations and posts
Post type, foundation depth and fixing method are chosen by soil, fence height and expected loads.
Bracing and alignment
Temporary bracing and a guide string keep the post line true before foundations set and mesh goes up.
Gates and entry points
Manual or sliding gates located to match vehicle and personnel movement on site.
How we work
From inspection to handover
in six steps.
A sequence the client knows in advance, so there are no surprises in scope during execution.
Site inspection
Visit the site and review the route, corners, entrances, ground levels and existing utilities.
Define specifications
Choose height, mesh type, posts, gates and top protection to match the use.
Quote with a clear scope
An itemized quote with quantities and inclusions so you can compare with confidence.
Set out and prepare foundations
Mark the fence line with string and pegs and prepare foundations at post positions.
Install posts and mesh
Raise and brace posts, then stretch the mesh and fit gates and top protection.
Review and handover
Check alignment and fixing and close out any notes before handover.
Choosing your contractor
Questions that separate
one quote from another.
The lowest price is not always the best work. Review these points before contracting any security fence contractor.
Ask the quote to state
- Fence route length and required height.
- Mesh type and wire thickness.
- Post type, fixing method and foundations.
- Number, type and location of gates.
- Top protection, if required.
And check that
- The contractor visited the site or reviewed photos carefully.
- Photos of previous work and execution stages exist.
- Duration, handover and review are clear.
- Fencing, gates, hangars and warehouses can share one scope.
- Support after installation is easy to reach.
FAQ
What people ask
before contracting.
Short answers to common questions from factory owners, project owners and landowners.
What does a security fence contractor do?
They inspect the site, define the fence route, height, mesh type, posts, foundations, gates and top protection, then install and check alignment and fixing before handover.
How do I choose a security fence contractor?
Check that the scope is clear, the specification matches the site, the post fixing method and foundations are explained, mesh, gates and top protection are itemized in the quote, and ask to see completed work.
Can barbed wire or top protection be added?
Yes. Coiled or straight barbed wire can be added as top protection where the project needs a higher protection level, subject to site requirements.
What information do I need to send for a quote?
Send the city, project location, approximate fence length, required height, number of gates and site photos. We then inspect and define the scope before the quote is approved.
Do you work outside Riyadh?
Yes. We execute across the Kingdom according to project scope; the visit and schedule are coordinated once we receive the site details.
Qimam Al-Hemaya Contracting
Need a security fence contractor? Start with site photos.
Send the city, approximate fence length, required height and site photos, and we will define the scope with you and arrange the visit.
Contact us on WhatsAppCall 0568295851info@saudi-fences-hangars.com